Operation Manual

Chapter 2
Product Description
19
2.3.2. Battery Charging
The batteries of the Display (DH) and Remote (RH) handset are charged using the adapter. It
takes approximately 6-8 hours until the batteries in the instrument are fully charged. If the
batteries are charged externally, charge time is approximately 4 hours.
During recharging, the instrument is calibrated to the corresponding battery. This ensures an
accurate indication of the charge state at all times.
NOTE:
Charge time depends on charge state of battery.
When the battery is removed, the Display handset (DH) data and preferences are preserved
in the flash ROM by a coin cell lithium battery.
2.4. Talkset
The LanTEK
®
II Cable Certifier is designed for use with a talkset. This function allows
communication between the Display (DH) and Remote (RH) handset through an externally
attached microphone/headset. For this purpose, the Display (DH) and Remote (RH) handset
must be connected to the test adapters through a cable.