Operation Manual
Chapter 10
IDEAL DataCENTER Software
101
10.7.2. Define test selection.
A report can consist of all tests in a job folder, a selection of available tests in a job folder, or
only one (1) test in a job folder.
If only one (1) test or one selection of the existing tests shall appear in the report:
1. Select the table view.
2. Click with mouse cursor on the desired test.
or
3. Combine a selection by pressing and holding the Shift key on the keyboard and
clicking on the desired tests with the mouse cursor.
10.7.3. Print
1. Click on Print or on File in the menu bar and then on Print.
Illustration 10.7.3. Print properties
2. Under Print range highlight the option
o All if all tests in a job folder shall be displayed.
o Selection if you have defined a single test or a selection of tests in the table
view.
o Range if a certain test sequence shall be displayed in the table view, e.g. tests
of position 1 to position 3 (1 – 3).
3. Under Report Type highlight the option
o Single Line if the selected tests shall be displayed in a single line. The displayed
test records contain cable name, length, status, date, cable type and test
default.