Operation Manual

FiberTEK III Document 164802 Iss 3
User Manual Page 18
Fig. 10 Select fiber type
4.3.2 Selection of Refractive Index
1. Use Arrow Keys to navigate on ready screen to " LASER" display and confirm with Enter.
2. Use soft key to display the Refractive Index screen.
3. Set the Refractive Index according to the cable manufacturer's data.
Note: The Refractive Index setting is not affected by changing the Fiber Standard
Fig. 11 Set refractive index
4.3.3 Selection of Fiber size and Wavelength
1. After selecting Fiber type, the cable properties screen is displayed.
2. Use soft key to select the fiber size.
3. Use soft keys / to select test wavelength
Fig. 12 Select Fiber size and wavelength
*** WRONG PICTURE ***