User manual

Chapter 6
Test Description and Procedure
54
6.14. Statistics
The availability of individual statistics depends on the model version and test setup of the
LanXPLORER.
Statics are kept automatically on active networks and saved together with the tests
performed.
1. Select the menu point "Stats" on the
standby screen.
2. Select the desired statistics to be
displayed.
The LanXPLORER can keep the following statistics on active networks.
Image
Description
Top Ten
Display of 10 largest wideband users, error sources and protocols.
IP
Display of device IP login configuration.
VLAN
Display of recognised, active virtual networks presently in use.
MAC
Displays the package statistics in layer 2:
More: further package statistics
Size: Distribution size of the package
LINK
Display of link information:
Port: Detailed information for configuring the port
6
Fault: Detailed fault counter on layer 1
Partner: Possible connecting speeds
802.1x
802.1x
Status data listed is:
Auth Not Started, Auth Started, Auth Completed Successfully, Auth Failed.
Port Status data listed is:
Unauthorized, Authorized.
Also shown are: EAP Method Used and Key Management Used.
6
In the fibre-optic conductor mode, lighting power that is additionally received and transmitted is
displayed in µW (depending on the SFP version).
52