User manual

Chapter 6
Test Description and Procedure
46
6.5. Netmap
This test searches a network for hosts. The LanXPLORER uses the test results to complete
an overview of all servers and printers present in the connected network. It also output
the total number of all devices found. A maximum of 511 hosts can be detected and
displayed.
6.5.1. Performing test
1. Select the menu point "Tests" on the standby screen.
2. Select the menu point "Netmap".
3. Select Run to start the test.
6.5.2. Saving Netmap for comparisons - Verify
The device list can be saved in the instrument and
used for comparison with new tests.
1. Select Save Map to store the current
Netmap.
2. Select the currently saved Netmap.
3. Select Rename to edit information.
4. Enter the desired information with the
alphanumeric keys.
5. Save the entry made with OK. You can exit the menu without saving the
changes with Cancel or Escape.
6.5.3. Display results
It is possible to view the test details on the individual hosts.
 IP address
 MAC address
 Services
 Station name
1. Select the desired option to display a host overview.
2. Mark the host for which you want to view more details.
3. Select the Details.
Figure 45: Netmap