User manual

Chapter 6
Test Description and Procedure
45
6.4. Testing a passive route without remote / active Remote
The LanXPLORER can generate a low and a high tone
and a warbling tone which alternates between the low
and high tone at a rate of 2 Hz and can be recognised
by the majority of common line testers (e.g. IDEAL
No. 62-164).
Item
Description
1
LanXPLORER
2
Patch Cord
3
Wall Outlet
4
Patch Panel
5
Inductive receiver
Performing test
1. Connect the free end of the cable path to the RJ45 network port on the
LanXPLORER.
2. Select the menu point "Tests" on the standby screen.
3. Select the menu point "ToneGen".
4. Find the open end of the cable path with an inductive receiver (e.g. IDEAL No.
62-164).
Figure 44: Typical use of tone
generator