User manual

Chapter 6
Test Description and Procedure
42
6.2. Autotest
The autotest feature allows the installation to be checked quickly and easily. After
pressing the AUTOTEST button, the LanXPLORER automatically runs the individual tests
set.
Selection of the individual tests in the test series depends on the instrument settings and
the type of wiring to be tested.
6.2.1. Run Autotest
1. Connect the LanXPLORER in the desired manner.
2. Set the Autotest options (the Autotest option settings are described in
Chapter 3.5.2).
3. Select Run to start the Autotest.
6.2.2. Overall pass/fail result
After conclusion of the test series, the LanXPLORER displays an overall pass/fail result as
well as the individual pass/fail results.
Symbol
Overall Autotest results
The Autotest is evaluated as passed all total,
when all individual tests are passed.
The Autotest is evaluated as failed all total, when
at least one individual test was failed.
You can view the results of the individual tests, save the results or make Autotest
settings.
Display of individual test results
4. Select the desired individual test.
5. Select More to view additional details on the specific test results.
6. Press Escape to return to the previous screen.
Figure 41: Autotest - Complete
overview