User manual

Chapter 5
Test Setup
40
5.6. WiFi
With this test the LanXPLORER can be connected with all access points and test wireless
networks within reception range. To increase the reception range, plug the supplied high
sensitivity antenna into the USB port before following the procedure below. An overview
the tests available is given in Table CHAPTER 4.
1. Select the menu "Ports" "WiFi".
2. Select Scan to start recognition of the
network.
Image
Description
SSID
SSID of access point.
CH
Channel
Security protocol
3. Select Run to start recognition of the network again.
4. Select Details to view further information on individual networks.
39