User manual

Chapter 3
Settings
29
3.6. IP
This menu allows settings to be made for logging onto a network.
1. Select Setup.
2. Select the menu point "IP".
Option
Description
IP Address
Dynamic: Automatic recognition of the
network properties.
Static: With this option it is necessary
to set the network properties
manually.
IP Address
3
Display of IP address.
NetMask
3
Display of network mask.
Gateway
3
Gateway setting.
DNS1
3
DNS1 setting.
DNS2
3
DNS2 setting.
NOTE:
When working with the Static option, request the required information on the IP address,
NetMask Gateway and DNS server from your system administrator.
3. Select the option IP Address to set Dynamic or Static.
4. Select the desired option
3
.
5. Enter the desired information with the alphanumeric keys
3
.
6. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
3
This setting is possible only when IP Address is set to Static.
Figure 29: IP