User manual

Chapter 3
Settings
25
5. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
VoIP (Voice over IP)
2
This menu allows settings to be made for the quality parameter of the VoIP test. The
LanXPLORER compares each call with the set quality parameters and evaluates the call.
1. Select the menu point "VoIP".
Option
Description
VOIP Port 1
Setting the communication port 1
VOIP Port 2
Setting the communication port 2
Jitter (ms)
Limit value for the measuring parameter
Jitter
Delay (ms)
Limit value for the measuring parameter
Delay
Lost Pkts (%)
Limit value for the measuring parameter of
lost packages
2. Select the desired option.
3. Enter the desired information with the alphanumeric keys.
4. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
2
The version of going to press can only be detected by calling up using SIP standard using the
LanXPLORER.
Figure 26: VoIP