User manual

Chapter 3
Settings
23
3.5.2. Autotest
The Autotest options can be set in this menu. You can set the tests to be performed by
actuating the Autotest button or selecting the "Autotest" menu.
1. Select the menu point "Autotest".
2. Activate or deactivate the option by
selecting. An activated option is indicated
by a check mark in the box.
3. Save the entry made with Apply. You can
exit the menu without saving the changes
with Escape.
3.5.3. IP Tests
This menu allows settings to be made for the IP test.
1. Select the menu point "IP Tests".
Figure 22: Autotest settings
Figure 23: IP Tests