User manual

Chapter 3
Settings
20
1. Select the menu point "Factory".
2. With Reset returns the instrument to the
factory settings and any settings you have
made are deleted.
3. You can exit the menu without saving the
changes with Cancel or Escape.
3.3. RJ45
This menu allows configuration of how the RJ45 interface connects to the network.
1. Select Setup.
2. Select the menu point "RJ45".
Option
Description
Auto
Negotiation
Enabled: Automatic recognition of the
network speed.
Disabled: It is necessary to set the
communication rate and mode manually.
Speed
ii
Setting the network speed.
Mode
ii
Full Duplex (all pairs are used for
transmitting and receiving).
Half Duplex (pairs are used for transmitting
or receiving).
Min. Rx Size
Smallest recognised packetsize
MDI
Configuration of the device interface
MAC
ii
Display of MAC address.
3. Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
Figure 16: Resetting instrument
to factory settings
Figure 17: RJ45 Settings