User manual

Chapter 2

Instrument description

2.2.3. Removing / installing rechargeable batteries

When the batteries are removed the LanXPLORER saves the data and settings in the

battery-buffered flash ROM.

1. Open the kick stand.

2. Remove the battery cover.

CAUTION!

The battery pack or battery holder is connected to the

LanXPLORER with a cable. When removing the

batteries, do not pull on the cable - damage to

instrument and connector could occur.

3. Remove the battery pack or battery

holder.

4. Detach the connector for the battery pack

or battery holder from the instrument.

5. If applicable, remove the batteries from

the battery holder.

Install batteries in opposite order.

Figure 5: Changing batteries

Figure 6: Removing batteries