User's Manual

Product Manual
SRC2100– 120/277 VAC Single Room Controller
ND xxxx-1 08/2017 Users Manual – SRC2100 Single Room Controller
Page 2
www.idealindustries.com
All other trademarks are the property of their respective owners.
IDEAL Model SRC2100 Single Room Controller Instructions
WARNING: This is a current rated device. Use in applications involving
amperage beyond its rating can be dangerous and cause electrical fires.
Wiring must comply with all applicable electrical codes.
Turn off power before removing or installing connector.
TERMINOLOGY
LINE(Black): Single Room Controller power feed to be connected to premise
wiring
LOAD(Red): Power output from Single Room Controller to AC lighting load
power input
Neutral(White): Incoming Neutral from premise wiring and outgoing lighting load
neutral.
DIM (Purple/Grey): 0-10 VDC dimming control output from Single Room
Controller to lighting load analog dimming input
CONNECTING THE WIRES
Input Power
The smart connector LINE(Black) and NEUTRAL(White) wires are 18 AWG solid copper
conductors.
1. Strip wires to 1/2”.
2. Connect Controller Line Input to premise line power feed with appropriate sized wirenut or
push-in connector.
3. Connect Controller Neutral Input to premise neutral feed with appropriately sized wirenut or
push-in connector..
4. For feed-through (i.e., “daisy-chain”) installations, connect the LINE hot feed-through
conductor into the wirenut in step 2. Also, connect the NEUTRAL feet-through conductor
connected without re-installing the wires. into the wirenut in step 3.