User's Manual

Product Manual
SCC1000 – Smart Connector
ND 7942-1 11/2014 Users Manual – SCC1000 Smart Connector Page 4
www.idealindustries.com
INSTALLING THE SCL1000 SMART CONNECTOR IN THE FIXTURE
1. After properly installing all wires per the instructions on page 1, fully extend the antenna.
See Fig. 1.
2. Remove the backing of the double-sided tape on the SCL1000, exposing the adhesive.
3. Insert the antenna through an available open hole in the fixture trough, making sure that as
much of the antenna extends into the plenum space above the fixture as possible. See Fig.
4.
4. Firmly press the connector into place.
Fig. 3
Positive/purple/+ conductor
Negative/gray/- conductor
Fig. 4