User's Manual

ManualsBrandsIdeal Industries ManualsElectronicsSmart Connector

Product Manual

ESC1000 – Downlight/LED Smart Connector

ND 8202-1 11/2015 Users Manual – ESC1000 Emerge Downlight/LED Smart Connector Page 1

www.idealindustries.com

PRODUCT DESCRIPTION

The DC Smart Connector is a wireless device

which provides electrical connectivity

between the light fixture (load) and 24V DC

power and provides on/off power control

and dimming signals to the load. The

information that tells the connector to

power on/off/dim the fixture is acquired via

wireless signals that originate from a

building automation system or from room

controls, based on environmental

conditions and/or predetermined

programs.

KEY FEATURES

FCC and IC approved

Small form factor

Integrated Wire Antenna

RoHS compliant

PRODUCT CONTENTS

The following items are included inside the

package:

Qty

Description

ESC1000 Smart Connector

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

All other trademarks are the property of their respective owners.

Summary of content (10 pages)

PAGE 1
Product Manual ESC1000 – Downlight/LED Smart Connector PRODUCT DESCRIPTION The DC Smart Connector is a wireless device which provides electrical connectivity between the light fixture (load) and 24V DC power and provides on/off power control and dimming signals to the load.
PAGE 2
Product Manual ESC1000 – Downlight/LED Smart Connector IDEAL Model ESC1000 LED Smart Connector Installation Instructions WARNING: This is a current rated device. Use in applications involving Amperage beyond its rating can be dangerous and cause electrical fires. Wiring must comply with all applicable electrical codes. Turn off power before removing or installing connector. DIM Connector Antenna LINE Connector LINE hot & feed-through LOAD Connector LINE Connector Fig.
PAGE 3
Product Manual ESC1000 – Downlight/LED Smart Connector Connector. LOAD Connector The LOAD Connector accepts 18 AWG copper conductors, solid or stranded (16 strands or less). Use only one conductor per port and ensure that no copper is exposed on any of the wires after installation. 1. Strip the wires to 3/8”. 2. Grip the LOAD +24V wire and firmly push conductor into the port marked with the black stripe. See Fig. 2. 3. Grip the LOAD -24V wire and firmly push conductor into the unmarked port. See Fig. 2. 4.
PAGE 4
Product Manual ESC1000 – Downlight/LED Smart Connector INSTALLING THE ESC1000 SMART CONNECTOR IN THE FIXTURE 1. After properly installing all wires per the instructions, fully extend the antenna. See Fig. 1. 2. Remove the backing of the double-sided tape on the ESC1000, exposing the adhesive. 3. Insert the antenna through an available open hole in the fixture trough, making sure that as much of the antenna extends into the plenum space above the fixture as possible. See Fig. 4. 4.
PAGE 5
Product Manual ESC1000 – Downlight/LED Smart Connector Refer to the Audacy™ system configuration manual to associate smart connectors to other devices and to set up operating parameters for the Audacy™ lighting control system SPECIFICATIONS Item Radio Description 915 MHz External Antenna FCC Part 15 and Industry Canada Contains FCC ID: 2AAMXESC1000 Regulatory Approvals Contains IC: 11250A-ESC1000 UL916 Transmit Range 300 ft.
PAGE 6
Product Manual ESC1000 – Downlight/LED Smart Connector *Dimensions in inches ND 8202-1 11/2015 Users Manual – ESC1000 Emerge Downlight/LED Smart Connector www.idealindustries.
PAGE 7
Product Manual ESC1000 – Downlight/LED Smart Connector SUPPORT Technical support for IDEAL INDUSTRIES products can be initiated through the following methods: Website: http://www.idealindustries.com/support/ Telephone: +1 800-435-0705 Email: contactus@idealindustries.com ND 8202-1 11/2015 Users Manual – ESC1000 Emerge Downlight/LED Smart Connector www.idealindustries.
PAGE 8
Product Manual ESC1000 – Downlight/LED Smart Connector COMPLIANCE STATEMENTS This device is intended for commercial and industrial applications. Changes or modifications not expressly approved by IDEAL could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 9
Product Manual ESC1000 – Downlight/LED Smart Connector IMPORTANT NOTICE Information furnished by IDEAL INDUSTRIES, INC. is believed to be accurate and reliable. No license, express or implied, to any intellectual property rights is granted by this document. No responsibility is assumed by IDEAL INDUSTRIES, INC. for its use, nor for any infringements of patents or other rights of third parties that may result from its use. IDEAL INDUSTRIES, INC. assumes no liability for misuse of this product.
PAGE 10
Product Manual ESC1000 – Downlight/LED Smart Connector WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of IDEAL.