SDS

Clear Glide
TM
Wire Pulling Lubricant
SDS#: ID006
Revision Date: June 1, 2015 Page 5 of 10
Thermal hazards: No data available.
SECTION 9: Physical and chemical properties
Appearance
Physical state: Gel
Form: Clear, colorless gel.
Color: Colorless.
Odor: Slight odor.
Odor threshold: No data available
pH: 7.0 - 8.0
Melting point/freezing point: No data available
Initial boiling point and 212
o
F (100
o
C)
boiling range:
Flash point: None
Evaporation rate: No data available
Flammability (solid, gas): Not applicable
Upper/lower flammability or explosive limits
Flammability limit – lower %): Not applicable
Flammability limit – upper (%): Not applicable
Explosive limit – lower (%): Not applicable
Explosive limit – upper (%): Not applicable
Vapor pressure: No data available
Vapor density: No data available
Relative Density: 1.09
Solubility(ies): Infinite in water.
Partition coefficient (n-octanol/water): No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Viscosity: 25300-40300 cps
Other information:
% Volatile by volume: < 98%
Volatile Organic Compounds (VOC) 17.4 gms/ltr
(as packaged, minus water)
Percent solids by weight: ~ 5%
SECTION 10: Stability and Reactivity
Reactivity: Not chemically reactive.
Chemical stability: Stable under normal ambient and anticipated
conditions of use.
Possibility of hazardous reactions: Hazardous reactions not anticipated.
Conditions to avoid: Avoid prolonged storage at temperatures exceeding
190 F.