SDS

Clear Glide
TM
Wire Pulling Lubricant
SDS#: ID006
Revision Date: June 1, 2015 Page 4 of 10
away from any incompatible material (see Section 10). Protect container(s) against physical
damage. Avoid prolonged storage at temperatures exceeding 190 F.
"Empty" containers retain residue and may be dangerous. "Empty" drums should be
completely drained, properly bunged, and promptly shipped to the supplier or a drum
reconditioner. All containers should be disposed of in an environmentally safe manner and in
accordance with governmental regulations.
SECTION 8: Exposure controls/personal protection
Control Parameters:
Occupational exposure limits:
US OSHA HAZARDOUS COMPONENTS (29 CFR 1910.1200):
Permissible Exposure Limits
Substance
PEL-TWA
(8 hour)
PEL-STEL
(15 min)
2-Amino-2-methyl-1-
propanol
None established
None established
US ACGIH Threshold Limit Values
Substance
TLV-TWA
(8 hour)
TLV-STEL
(15 min)
2-Amino-2-methyl-1-
propanol
None established
None established
NIOSH Exposure Limits
Substance
TWA
STEL
2-Amino-2-methyl-1-
propanol
None established
None established
Appropriate engineering controls: General (mechanical) room ventilation is expected to be
adequate. Additional means of room ventilation may be required in closed areas.
Individual protection measures, such as personal protective equipment:
Eye/face protection: The use of OSHA compliant Safety glasses or splash goggles are
recommended.
Skin and Hand protection: None normally required.
Respiratory protection: None normally required. Where protection from nuisance levels
of dusts are desired, use type N95 (US) dust masks. Use respirators and components tested
and approved under appropriate government standards such as NIOSH/OSHA.
Other: None required.