Product Manual

2
Oct 2018
UTVKIT-2200IEH-XR
2. Installation
1. Insert Side Extension’s Support Rods (2) to outside of Platform and secure with Wing Bolts
(12).
2. Once Rods are secured to Platform, install the Side Extensions (14 & 14-1) and secure each
end with Ring Clips (3).
Note: Ensure to correctly install Side Extensions with holes for Wheel Stops positioned to
front of lift. Also note UTV Side Extensions are LH & RH specific.
3. Install Pivot Ramps (1) to the rear of each Side Extension using Pins (15) & Circlips (16).
4. Insert Wheel Strop Bars (13) to the front of each Side Extension.
Center Drop Panel usage: If side extension’s Center Drop Panels are lowered
(folded down), ensure to securely latch back into level position with platform, prior
to lowering lift. Failure to do so, could result in lift, vehicle & property damage.
3. Parts List
ITEM M-Ref P/N DESCRIPTION QTY
1 JP23-07200-PB7 Pivot Ramp, UTV-XR 2
2 JP23-02001-PB2 Support Rod, UTV 4
3 JP04-00005-000 Ring Clip 4
4 JP23-04002-PB4 Latch Pin Bracket 2
5 5303-00006-000 Lock Washer, D6 4
6 5301-00006-000 Flat Washer, D6 4
7 5110-06012-000 Screw, M6 x 12mm 4
8 JP23-04001-PB4 Latch Pin, Drop Panel 2
9 JP23-04200-PB4 Center Drop Panel 2
10 5304-00012-000 Circlip, D12 8
11 JP24-00025-000 Hinge Pin 4
12 5121-10016-000 Wing Bolt, M12 x 16mm 4
13 JP17-00011-000 MC / UTV Wheel Stop 2
14 JP23-04300-PB7 Side Extension Panel, UTV-XR (LH) 1
14-1 JP23-04100-PB7 Side Extension Panel, UTV-XR (RH) 1
15 JP23-07001-PB7 Ramp Pivot Pin, UTV-XR 2
16 5304-00016-000 CIRCLIPS, D16 8
17 JP25-00004-000 Nylon Ramp Wheel 4