Product Manual

Apr. 2019

UF-2200EH-X

3.3 Necessary Tools & Supplies

· Forklift & Soft Sling Straps (recommended)

· 115VAC, 60 Hz, 20 Amp Service

· 6 Quarts of Non-Detergent / Non-Foaming Hydraulic Oil - SAE-10, AW 32 or equivalent

· Chalk Line

· Tape Measure

· Level

· Metric Wrenches & Sockets

· Adjustable Wrench

· Cross Head Screw Driver

· Oil Funnel

· Hammer Drill with 1/2” Carbide Drill Bit

· Gloves

3.4 Personal Protective Equipment

Always wear proper protective equipment like proper clothing, shoes, gloves & safety glasses, etc.

3.5 Set-Up & Installation

1. Unpacking

a. Carefully open crate and remove loose parts & components from top of lift structure.

b. Using a forklift (recommended) carefully remove lift from crate and place in the desired location (Fig.1).

NOTE: Ensure to check packing list to make certain all parts are included and in good condition.

Fig.1

2. Assembly (Pedestal Control Stand & Power Unit)

a. Using the Exploded View Diagram on Page 20 as a guide, assemble the components for Pedestal Control

Stand using the hardware provided. NOTE: Do not mount the Power Unit or Cover at this time.

b. Carefully mount the Control Panel to top plate located at the top of Pedestal Stand, as detailed in the Parts

List and Exploded View Diagram. NOTE: Ensure not to damage Wiring Harness or Plug Connectors.