Product Manual
2
Oct 2018
TRIKEKIT-2200IEH-XR
2. Installation
1. Insert Side Extension’s Support Rods (2) to outside of Platform and secure with Wing Bolts
(5).
2. Once Rods are secured to Platform, install the Side Extensions (4) and secure each end
with Ring Clips (3).
Note: Ensure to correctly install Side Extensions with holes for Wheel Stops positioned
towards front of lift.
3. Install Pivot Ramps (1) to the rear of each Side Extension using Pins (7) & Circlips (8).
4. Insert Wheel Strop Bars (6) to the front of each Side Extension.
5. Insert Front Extension Panel (10) to front of Platform and secure with Bolt (11) & Nut (12).
3. Parts List
ITEM
M-Ref P/N DESCRIPTION QTY
1 TK-2200IEH-XR-001
JP23-32000-PB8
Pivot Ramp, TRIKE-XR 2
2 TK-2200IEH-XR-002
JP23-03001-PB3
Support Rod, TRIKE 4
3 TK-2200IEH-XR-003
JP04-00005-000 Ring Clip 4
4 TK-2200IEH-XR-004
JP23-03100-PB8
Side Extension Panel, TRIKE-XR
2
5 TK-2200IEH-XR-005
5121-10016-000 Wing Bolt, M12 x 16mm 4
6 TK-2200IEH-XR-006
JP17-00011-000 MC / UTV Wheel Stop 2
7 TK-2200IEH-XR-007
JP23-08001-PB8
Ramp Pivot Pin, TRIKE-XR 2
8 TK-2200IEH-XR-008
5304-00016-000 Circlip, D16 8
9 TK-2200IEH-XR-009
JP25-00004-000 Nylon Ramp Wheel 4
10 TK-2200IEH-XR-010
JP23-07000-JC1
Front Extension Panel 1
11 TK-2200IEH-XR-011
5117-10025-000 Bolt, M10 x 25mm 2
12 TK-2200IEH-XR-012
5202-00008-000 Nut, M10 2