Product Manual

２
TP9KFX
Jun 2017
IMPORTANT NOTES
READ THE INSTALLATION AND OPERATION MANUAL IN ITS ENTIRETY BEFORE
ATTEMPTING TO INSTALL THE LIFT.
• Do not install this lift on any surface other than concrete, conforming to minimum specifications.
• Do not install this lift over expansion joints or cracks. Check with building architect.
• Do not install this lift on a second floor with a basement beneath without written authorization from
building architect.
• Do not install this lift outdoors unless special consideration has been made to protect the power unit
from inclement weather conditions.
• A level floor is recommended for proper installation and operation. Concrete should be a minimum
of 4-1/4” thickness and 3,000 psi tensile strength with steal or fiber mesh reinforcement.
• The lift is intended to raise the entire body of the vehicle. Do not attempt to lift only part of the vehicle.
Improper use of this equipment could result in damage to the lift, yourself or other property.
• The lift is intended to lift vehicles only. It is not designed to lift any person or equipment containing
persons.
• Users of this equipment should be qualified, responsible and should follow the operation and safety
guidelines set forth in this manual.
• For specifications on concrete pads, please call for technical assistance.
• Improper installation can cause damage or injury. The Manufacturer will NOT assume liability for loss
or damage of any kind, expressed or implied, resulting from improper installation or use of this
product.
DEFINITION
Surface Mounted, Two-Post, Open Top, Floor Plate Lift w/ Hydraulic ‘chain-over’ Drive, 9,000 lbs.
Capacity.
The name / model numbers are designated below:
• Model number TP9KFX - Symmetric Swing Arms configuration
BASIC SPECIFICATIONS
Model Description
(Floor Plate)
Capacity Lifting Time Overall
Height
Overall
Width
Lifting
height
Between
Posts
TP9KFX Symmetric 9,000 lbs. 50 Sec 111-5/16” 134-5/8” 72” 110-7/16”