Product Manual

8
TP12KSC-DX
July 2018
1. PRODUCT INFORMATION
1.1 Product Description
The TP12KSC-DX 2-post hydraulic lift is a surface mounted, frame contact lift incorporating the latest safety
technologies. Designed and manufactured for a lifting capacity of 12,000 lbs. (Max 3,000 lbs. per Lifting Arm)
and is fully capable for lifting vehicles, vans, light & heavy trucks by safely holding them in an elevated position.
The TP12KSC-DX incorporates symmetric swing arms for symmetrical lifting configuration.
The TP12KSC-DX 2-post hydraulic lift consists of a fixed
structural unit (Crossbeam, Columns & Uprights), the
mobile units (Carriages and Lift Arms), and the Hydraulic
Power System and mechanical Safety Latch Release
device.
A. Crossbeam
B. Column
C. Carriage
D. Lifting Arm
E. Power Unit
F. Overhead Safety Shut-Off Bar
G. Single Point Safety-Latch Release
H. Upright (column extension)
1.2 Technical Data
Capacity 12,000 lbs. (Max 3,000 lbs. per Arm)
Height Overall 168-1/2”
Width Overall w/ Power Unit 151-5/16”
Max Lifting Height 75”
Max Lifting Height w/ Tallest Adaptor 80”
Width Between Columns 122”
Min Pad Height 4-7/8”
Drive Thru Clearance 109”
Swing Arm Reach – Min / Max 37-5/8” – 57”
Electrical Power 220V, 20 Amp, 1 Phase
Max Operating Pressure 3,050 PSI