Product Manual

May 2019

TCWB-PSC206M-iDEAL

9. ADJUSTING OPERATION

· Tread the Turntable Rotation Pedal (Z), Turntable (Y) clockwise rotation; Lift up the

Turntable Rotation Pedal (Z), Turntable (Y) counterclockwise rotation.

Tread Bead Breaker Pedal (U), Bead Breaker shovel (F) close toward inside;

release Bead Breaker Pedal (U), Bead Breaker shovel (F) return to original position.

· Tread Jaws open and close Pedal (V), four jaws (G) on the turntable open; tread

again, four jaws (G) close. When the pedal is in the middle position, the four jaws

stop moving.

TIRE CHANGER OPERATION IS CONSISTED OF THREE PARTS:

1. Breaking the tire bead

2. Demounting the tire

3. Mounting the tire

CAUTION: Before any operations, don’t wear loose clothing and wear protective hat,

gloves, and skid-proof shoes. Ensure to exhaust the air in the tire completely, and

remove all the wheel weights from the rim.

9.1. BREAKING THE TIRE BEAD

Ensure to exhaust the air in the tire completely, place the

tire against the rubber buffer (S). Bring the paddle against

the bead about 10mm from the edge of the rim shown as

Fig 5. Tread Bead breaker Pedal (U) to push paddle into

tire. Repeat the above operations on different positions

around the tire and both sides of tire until tire bead is

released completely.

Fig 5