Product Manual

May 2019

TCWB-PSC206M-iDEAL

4. TRANSPORT

When transporting, the machine should be with original package and placed according

to the mark on the package. For the already packaged machine should be handled

with a corresponding tonnage forklift for loading and unloading. The location to insert

the fork feet, as shown as Fig 1.

5. UNPACKING & INSPECTION

Pull out the nail which is nailed on the plate with tip jaw; unpack the carton and plastic

cover. Check and make sure all parts shown on the spare parts list are included. If any

parts are missing or broken, please do not use the machine and contact the

manufacturer or dealer ASAP.

Fig 1 Fig 2 Fig 3

6. WORKPLACE REQUIREMENTS

Choose workplace in compliance with safety regulations. Connect power supply and

air source according to manual and workplace must have good air condition; in order to

make the machine run well, its workplace requires at least clear space from each wall

shown as Fig 2. If installing it outdoor, it must be protected by roof against rain and

sunshine.

WARNING: the machine with motor must not be operated in explosive

atmosphere.