Product Manual

48
May 2019
TCWB-PSC206M-iDEAL
15. TROUBLE-ERROR CODE LIST
When balancer display hint of error, can follow consult below list to remove the trouble:
Code Meanings Cause Remedy
Err 1
Principal axis not
spin or have not
spin signal
1. Computer board fault
2. Connection-peg untouched
1. Change computer board
2. Check cable connections
Err 2
The rotation
speed is low
1. Position sensor fault
2. Wheel not impacting or
weight too light
3. Computer board fault
1. Change position sensor
2. Repeat impacting wheel
3. Change computer board
Err 3
Miscalculation
Too high imbalance
Repeat the self-calibration or
change computer board
Err 4
Principal axis
wrong rotation
direction
1. Position sensor fault
2. Computer board fault
1. Change position sensor
2. Change computer board
Err 6
Sensor signal
transact circuit not
working
1. Power supply board fault
2. Computer board fault
1. Change power supply
board
2. Change computer board
Err 7
Lose date of
interior
1. Incorrect self-calibration
2. Computer board fault
1. Repeat the self-calibration
2. Change computer board
Err 8
Self-calibration
memory fault
1. Not put 100 gram on the
rim when self-calibration
2. Power supply board fault
3. Computer board fault
4. Press sensor fault
5. Connection-peg untouched
1. Follow right method repeat
self-calibration
2. Change power supply board
3. Change computer board
4. Change press sensor
5. Check cable connection