Product Manual

42
May 2019
TCWB-PSC206M-iDEAL
Fig 8-3
Slowly rotate wheel by hand again, when both side middle position indicator light flash
(Fig 8-4), use chalk to make a mark on the rim.
Fig 8-4
Demount wheel from balancer, use tire changer to demount tire from rim. Remount tire
on rim to make tire and rim marks at same position. Optimize complete.
8.2 AFTER POWER ON & BEFORE BALANCING
(ALSO MAY PROCESS IMBALANCE OPTIMIZE DIRECTLY)
Turn on the power, install wheel, press OPT key, left side display shows OPT, quickly
rotate wheel for balance testing. When rotation stops, display shows Fig 8-1, follow 8.1
operation. Press [SET] key to stop operation.
9. SELF-CALIBRATING OF DYNAMIC BALANCER
The self-calibrating of dynamic balancer was finished before ex-factory, but the system
parameter may vary because of long-distance transportation or long term use, which
may cause error. Therefore, users can make self-calibrating after a period of time.
9.1 After the power-on of the machine, the initialization is finished (Fig 7-1), install a
middle size balanced rim which can be clamped with counterweight, follow 7.2 to input
data of rim.
9.2 Press [FINE] + [SET] key (Fig 9-1), manually rotate wheel, when display is off,
move hand away to let wheel rotate. When display shows “REDUCE”, it means rotary
speed is too faster now. When rotary speed reaches normal speed, display shows
“RUN ---”. When display shows “STOP”, wheel stops rotating, display is as Fig 8-2
.Press [SET] key to exit.
Fig 9-1