Product Manual

40
May 2019
TCWB-PSC206M-iDEAL
Fig 7-9
Input rim data, manually rotate wheel, when display shows “RUN ---”, move hand away
to let wheel rotate. When display shows “STOP”, wheel stops and display shows data.
Slowly rotate wheel, when inside position indication LEDs all light, (Fig 5-1 (10)), at the
12 o’clock position of rim inside aI position, stick weights equal to value shown on the
left side display. Then slowly rotate wheel, when outside position indication LEDs all
light, (Fig 5-1 (11)), at the 12 o’clock position of rim outside aE position, stick weights
equal to value shown on the right side display. Rotate wheel by hand again, when
display shows “RUN ---”, move hand away to let wheel rotate. When both side display
show 0, balancing is completed.
7.8 COUNTERWEIGHT SPLIT AND HIDDEN-STICK MODE
This mode can split counterweights between two spokes into two section
counterweight and the two section counterweights may be applied behind two adjacent
spokes so that counterweights are hidden. This mode is based on ALU-S mode.
Follow 7.7 operation, if outer side counterweight sticking position is not behind spokes,
and user needs to hide counterweight behind spokes, user can operate as follows:
Press [FUNC] key, SPLIT indicator light (Fig 5-1 (16)) is on, spoke numbers inputting
interface appears (Fig 7-10). Press b+ or b- key to input spoke numbers, press [FUNC]
key;
Fig 7-10
Slowly rotate wheel, make one piece spoke vertical upwards, press [FUNC] key.
Slowly rotate wheel, find two imbalance positions following the imbalance position
indication light, stick counterweights equal to two sections value at 12 o’clock position
behind spokes. Quickly rotate wheel to balance wheel.
Counterweights split and hidden operation is completed.