Product Manual

May 2019

TCWB-PSC206M-iDEAL

4. INSTALLATION OF DYNAMIC BALANCER

4.1 OPENING AND CHECKING

Open the package and check whether there are damaged parts. If there are some

problems, please do not use the equipment and contact with the supplier.

Standard accessories with equipment are shown as follow:

· Screw Stud of Drive Axis 1

· Balancing Pliers 1

· Allen Wrench 1

· Measure Caliper 1

· Quick Release Nut 1

· Cones 3

· Calibration Weight (100g) 1

4.2 INSTALLING MACHINE

4.2.1 The balancer must be installed on firm platform which is more than

60CM high and fixed with 3pcs M8 screws.

4.2.2 There should be 500mm (20”) around the balancer in order to operate

comfortability.

4.3 INSTALLING SCREW ROD

Install screw rod on the main axis with M10 x 150 socket bolt, then fasten the bolt.