Product Manual

29
May 2019
TCWB-PSC206M-iDEAL
WHEEL BALANCING MACHINE
INSTRUCTION & MAINTENANCE MANUAL
1. INTRODUCTION
An imbalanced wheel will make the wheel jump and steering wheel wobble while
driving. It can baffle the driver to drive, aggrandize the cleft of combine area of steering
system, damage the vibration damper and steering parts, and increase the probability
of the traffic accidents. A balanced wheel will avoid all these problems. This equipment
adopts the new LSI (Large Scale Integrated circuit) to constitute the hardware system
that acquires processes and calculates information at a high speed.
Read the manual carefully before operating the equipment to ensure normal and safe
operation. Dismantling or replacing the parts of equipment should be avoided. When it
needs repairing, please contact with technical service department. Before balancing,
ensure the wheel fixed on the flange tightly. Operator should wear close-fitting smock
to prevent from hanging up. Non-operator does not start the equipment. No use while
beyond the stated function range of manual.
2. SPECIFICATIONS & FEATURES
2.1 SPECIFICATIONS
· Max Wheel Weight: 140 lbs · Power Supply: DC12V 1A
· Rotating Speed: About 120r/min · Cycle Time: 8s
· Rim Diameter: 10”-24”(256mm-610mm) · Noise: <70dB
· Rim Width: 1.5”-20”(40mm-510mm) · Net Weight: 67 lbs
2.2 FEATURES
· Adopt 6 LED display, it has flexible interface operating function.
· Energy saving, motor free, hand spin.
· Various balancing modes can carry out counterweights to stick, clamp, or hidden
stick etc.
· Intelligent self-calibrating.
· Automatic self-error diagnosis and protection function.
· Applicable for various rims of steel structure and aluminum alloy structure.