Product Manual

15
May 2019
TCWB-PSC206M-iDEAL
13. TROUBLE SHOOTING TABLE
Problem Reason Solution
The turntable rotates
just in one direction or
can’t rotate.
Reverse Switch broken
Replace the Reverse
Switch
Belt broken Replace the belt
The Motor’s malfunction
Check the motor cable
or terminal block wire;
Replace the motor if it
was broken.
Demount or fix the
wheel, the turntable
can’t lock
(spin with wheel);
The jaws delay to
open/close;
The turntable locks the
rim incorrectly.
Leakage of Air network
Check all the parts on
the air network.
The clamping cylinder
can’t work.
Replace the cylinder
piston.
Worn jaws Replace the jaws.
Broken washers of the
chuck cylinder
Replace it.
The
mounting/demounting
head always touch the
rim during operation.
The locking plate
incorrectly adjust or
unqualified.
Replace or adjust it.
Screws on the chuck
loose; the Hexagonal
Vertical Arm can’t be
locked by Locking Plate
Tighten the screws;
replace the Locking
Plate.
The Bead Breaker
Pedal and Jaw open
and close Pedal can’t
turn back to the original
position.
Pedal spring broken Replace it.
The Bead Breaker
shovel operates
difficultly.
Jammed silencer Clean it or replace it.
The washer on the Bead
Breaker cylinder is
broken.
Replace it.