Product Manual

14
May 2019
TCWB-PSC206M-iDEAL
NOTE: If Hexagonal Vertical Arm not be locked or not meet the requirement that
2-3mm from the bottom of Mounting/demounting head to rim, please adjust
Hexagonal Locking Plate, refer to Fig 12 and adjust the (X).
In order to achieve the reliability of jaws and Bead Breaker shovel, operate as follows
to keep their valves clean:
1. Remove the left side cover of the machine body by unscrewing the two
screws.
2. Loosen the valve Muffler (A) which belong to Jaws open and close Pedal and
Bead Breaker Pedal. (Fig 13)
3. Clean the mufflers with compressed air, please replace it referring to the spare
parts list if it is damaged. (Fig 13)
Fig 11 Fig 12 Fig 13