Product Manual

May 2019

TCWB-PSC206M-iDEAL

PLEASE OPERATE AS FOLLOWS:

1. Remove the valve cap from the valve stem.

2. Check to make sure the air nozzle is pressed down

completely over the threads of the valve stem.

3. Check to make sure that the tire and the wheel

rim are of the same size.

4. Lubricate both the tire bead and the wheel rim,

additional lubrication is required if needed.

5. Inflate the tire with break, while inflating, check

the pressure listed on the pressure gauge, also

check whether the bead is fixed or not. Repeat

operation above until the bead is secured; you

need take special steps when inflating convex rim

or double convex rim.

6. Continue inflating and check the air pressure

frequently until to reach the required pressure.

Fig 8

NOTE:

· Never exceed the max inflation pressure given by the tire manufacturer.

· Keep hands and your body away from inflating tires.

· Only specially trained persons are allowed to perform the operations, do not

allow other to operate or be near the tire changer.

11. MOVING MACHINE

Please use forklift to move the machine. Disconnect the tire changer from the

electricity power supply and pneumatic power supply, lift the base board and insert the

feet of forklift. Then mount the tire changer machine to a new position and fix it tightly.

NOTE: The place chosen for fixing the tire changer must meet the safety regulation.

(

Fig