Product Manual

iDEAL Paint Spray Booth (PSB-SEMIDD26ASY-A)

Exhaust Chamber Filter Grid Installation:

Exhaust Filter Grid Section

1. Using #8 drill screws, screw a 113-3/4” (KC07) angle to the top & bottom of the opening.

2. Screw three sets of two 113-1/2” (KC07) angles together back to back.

3. Place these sets across the exhaust filter opening on 20” centers and screw in place.

4. Place 5 each 2”x19-3/4” flat strips (KC04) vertically on 22-3/4” centers in each ‘horizontal’ opening and

screw in place from the backside of the frame.

5. Place a 2”x113-1/2” flat strips (KC11) horizontally in the center of the opening and screw in place from

the backside of the frame.

6. Cut a piece of the roll blanket filter to fit into each of the four ‘horizontal’ openings and push in place.