Product Manual

iDEAL Paint Spray Booth (PSB-SEMIDD26ASY-A)
14
Intake Filter Grid Installation – Continued (NOTE: 2” side of angle goes up and smaller angle sticks out horizontally)
Center - Intake Filter Grid Section
1. Screw one 99-1/2” angle (KC01) to the 100” side of the intake filter opening using #8 drill screws. Repeat
on opposite side.
2. Screw one 99-1/2“angle (KC01) to the other 100” side of the intake filter opening using #8 drill screws.
Repeat on opposite side of small intake filter opening.
3. Screw two sets of two 99-1/2” angles (KC01) together back to back.
4. Place these sets across the intake filter opening on 20” centers and screw in place.
5. Screw three sets of two 19-1/2” angles (KC03) together back to back.
6. Place these sets across the 20” opening formed by the sets of 99-1/2” angles on 50” centers and screw
in place. This forms 20”x50” rectangles for intake filters.
Center - Intake Filter Grid Section