Product Manual

iDEAL Paint Spray Booth (PSB-SEMIDD26ASY-A)

Intake Filter Grid Installation (NOTE: 2” side of angle goes up and smaller angle sticks out horizontally)

Front - Intake Filter Grid Section

1. Screw two 40” angles (KC02) to the 80” side of the small intake filter opening using #8 drill screws.

Repeat on opposite side of small intake filter opening.

2. Screw one 99-1/2“angle (KC01) to the 100” side of the small intake filter opening using #8 drill screws.

Repeat on opposite side of small intake filter opening.

3. Screw three sets of two 99-1/2” (KC01) angles together back to back.

4. Place these sets across the small intake filter opening on 20” centers and screw in place.

5. Screw four sets of two 19-1/2” (KC03) angles together back to back.

6. Place these sets across the 20” opening formed by the sets of 99-1/2” angles on 50” centers and screw

in place. This forms 20”x 50” rectangles for intake filters.

Front - Intake Filter Grid Section