Product Manual

iDEAL Open Front Paint Spray Booth (PSB-AFOFB1388-AK)

NOTE: Also refer to exploded view drawings included with your spray booth for installation details.

Basic Installation - First Section:

1. Determine where booth will be constructed (determine where exhaust stack will exit through the roof) and

where Side Door will be placed.

2. Use chalk lines to place booth layout on the floor.

3. Layout all floor channels for exhaust chamber and walls. As you attach wall panels together, they will also bolt

to the floor channel.

4. Starting with exhaust chamber at either rear corner, bolt one corner panel and one rear wall corner panel

together.

5. Bolt opposite rear sidewall panel to rear wall panel.

6. Bolt all rear wall panels in place.

7. Bolt tie channel along top edge of rear wall panels.

8. Place exhaust fan panel above side and rear wall panels and bolt in place.

9. Insert filter filler panels between sidewall, roof panels and exhaust chamber. Bolt in place.