Product Manual

MSC-STAND18X

July 2018

Important Information

· Stand shall be maintained by a qualified person.

· Stand shall be inspected immediately if the device is believed to have been subject to an

abnormal load or shock. This inspection should be made by a manufacturer’s or supplier’s

authorized facility.

· Owners and operators should be aware that repair of this equipment may require specialized

knowledge and facilities.

· An annual inspection of Stand should be made by a manufacturer’s or supplier’s authorized

repair facility, and any defective parts, decals, or safety labels or signs should be replaced with

manufacturers or supplier’s specified parts. A list of authorized repair facilities should be

available from the manufacturer or supplier.

· Any Stand that appears to be damaged in any way, is found to be worn, or operates abnormally

SHALL BE REMOVED FROM SERVICE UNTIL REPAIRED. Necessary repairs should be made by

manufacturer’s or supplier’s authorized repair facility if repairs are permitted by the

manufacturer or supplier.

· ONLY attachments and adapters supplied by or approved by the manufacturer shall be used.

· It shall be the responsibility of the employer to ensure that applicable personal protective

equipment (PPE) complies with applicable local safety codes.

Safety Labels & Product ID Information