Product Manual

5
MSC-18K-X
May 2019
9. Adequate ventilation should be provided when working on operating internal combustion engines.
10. Keep hair, loose clothing, fingers, and all parts of body away from moving parts.
11. To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
12. Use only as described in this manual. Use only manufacturer’s recommended attachments.
13. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses;
they are not safety glasses.
14. Inspect lift daily. Do not operate if it malfunctions or problems have been encountered. Never
operate lift if it has broken, damaged or worn parts.
15. Never attempt to overload the lift. The manufacturer’s rated capacity is shown on the identification
label on the power side column. Do not override the operating controls or the warranty will be void.
16. Only trained and authorized personnel should operate the lift. Do not allow customers or
bystanders to operate the lift or be in the lift area.
17. Position the lift support pads to contact the vehicle manufacturers recommended lifting points.
Raise the lift until the pads contact the vehicle. Check pads for secure contact with the vehicle.
18. CAUTION! Never work under the lift unless the mechanical safety locks are engaged.
19. Note that the removal or installation of some vehicle parts may cause a critical load shift in the
center of gravity and may cause the vehicle to become unstable. Refer to the vehicle
manufacturer’s service manual for recommended procedures.
20. Always keep the lift area free of obstruction and debris. Grease and oil spills should always be
cleaned up immediately.
21. Never raise vehicle with passengers inside.
22. Before lowering check area for any obstructions.
23. Before removing the vehicle from the lift area, position the columns to prevent damage to the lift
and /or vehicle.