Product Manual

Mar 2016

MSC-13K

9. CHANGE THE NUMBER OF COLUMNS

Normally the mobile column lift set is working with four columns. But it can work only

with two columns ( only 1# and 2# column) ．

To take away columns ( 4→2), please do as following.

Step 1

Lower down all the columns to ground till ‘RESET!’ appears on the screen.

Step 2

Turn off the power switch of each control units.

Step 3

Disconnect the cable between column 1#--3#, 2#--4#.

Step 4

Turn on the power switch of the control unit on desired columns (2# and 1#)

again.

Step 5

After self-check, now the system is working with only two columns.

To add columns (2→4), do above steps except in Step 3 is to connect the cables from

1#--3#, 2#--4# and in Step 4 turn on all the power switches on columns.

NOTE:

To lower down all columns to ground and to wait for RESET! APPEAR ON THE

SCREEN is necessary.