Product Manual

20
Mar 2016
MSC-13K
4.2 RAISING AND LOWERING ALL COLUMNS
Press UP or DOWN button to raise or lower the vehicle to desired height.
When the DOWN button is pressed, the columns will be raised up a little
distance, to unlock the mechanical lock, and then lower down.
Once desired height has been reached, it is recommended that the lift be
lowered into the mechanical locks by pressing PARK button.
Before begin to work under the vehicle, it is recommended to support the
vehicle with the safety stand before turning power switch to middle position
(OFF)
4.3 Explanation of message on LCD:
1. Slowing
Or
Column 2# or both 1# and 2# are quick in rising or lowering, The height
difference is greater than 3/4” (20mm), the column(s) will be slowed down
automatically.
2. Suspending
Or
Both column 1# and 2# are quick in rising or lowering. The height difference is
greater than 2” (50mm), the column will be suspended automatically.
3. Times and minutes
When in ALL mode, there are time and
min on the bottom line on the screen. It
shows from the beginning (software
installed) how many times the motors
have been started how long it worked
for pumping up the cylinder.
Mode: II
..
II
bias: Z_
_
_
L2 11 10 0
10 10 0
Slowing
…
Mode: II
..
II
bias: Z_
_
_
L2 54 55 0
L1 54 55 0
Slowing
…
Mode: II
..
II
bias: Z_
_
_
L2 28 30 0
L1 28 30 0
Suspending
…
Mode: II
..
II
bias: Z_
_
_
L2 48 47 0
L1 46 46 0
Suspending…
Mode: II
..
II
bias: Z_
_
_
4 3 0
2 3 0
Reset! 51time 17min