Installation Guide

Patent No. US 8,856,780 CA 2759622
>>
01
02
03
ENGINE
START
STOP
STOP ACC ON START
ON
04
05
06
07
>>
08
09
ENGINE
START
STOP
STOP ACC ON START
STOP
10
11
AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Program aftermarket remotes
before usage. A maximum of four [4x]
aftermarket remotes per system.
Insert keyfob into keyport.
Time restriction. Complete next step within 7
seconds.
Cycle ignition ON fi ve times [5x OFF/ON]
rapidly.
Parking Light will fl ash once [1x].
Time restriction. Complete next step within 5
seconds from previous step.
Press once [1x] on LOCK button of aftermarket
remote.
Parking Light will fl ash once [1x].
To program additional remotes: repeat steps 5
to 7 using each additional remote.
Wait, Parking Light will fl ash twice [2x].
Turn ignition to STOP position.
Remove keyfob from keyport.
Aftermarket Remote Programming Procedure
completed.
www.idatastart.comAutomotive Data Solutions Inc. © 2019 IDSIIDSRSBM1CMBMXA0EN
PAGE 12 OF 20
• 20190703
DOC.: #64342