Owner's Manual

ADS-RR(SR)-WJL1-DS-IG-EN maestro.idatalink.com
Jeep WranGler Jl 2018-2022
Automotive Data Solutions Inc. © 2022
5
1
* ONLY CONNECT TO RADIO REVERSE INPUT OR MODULE DAMAGE
WILL OCCUR. ONLY CONNECT IF USING AN AFTERMARKET CAMERA
OR INTERFACE TO RETAIN THE FACTORY CAMERA.
STEP 6
STEP 7
BLACK
STEP 3
STEP 5
STEP 8
CAN JUNCTION CONNECTOR (GREEN)
BEHIND GLOVE BOX
RIGHT SIDE OF DASH BELOW RADIO
MEDIA HUB
WIRING DIAGRAM
STEP 1
STEP 2
STEP 4
MAESTRO RR MODULE
WHITE - LF SPEAKER (+)
WHITE/BLACK - LF SPEAKER (-)
GRAY - RF SPEAKER (+)
GRAY/BLACK - RF SPEAKER (-)
GREEN - LR SPEAKER (+)
GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUND
RED - ACCESSORY (+)
GREEN WHITE
WHITE GREEN
CONNECTIONS WITH AMP
CONNECTIONS WITHOUT AMP
ORANGE - ILLUMINATION (+)
PURPLE/WHITE - REVERSE LIGHT (+) *
LTGREEN - E-BRAKE (-)
BLUE/WHITE - AMP. TURN ON (+)
MAIN
HARNESS
DATA
CABLE
AUDIO
CABLE
PURPLE - RR SPEAKER (+)
CONNECT TO
AFTERMARKET RADIO
PAC1 T-HARNESS
FACTORY RADIO HARNESS
WIRES
FROM
VEHICLE
PINK - VEHICLE SPEED
YELLOW/BLACK (NC)
BROWN (NC)
GREEN GREEN
WHITEWHITE
SPEAKER*
*REQUIRED ACCESSORY
READ NOTE IN
INSTALLATION
INSTRUCTIONS
SECTION
STEERING WHEEL
CONTROL CABLE
NOT REQUIRED
BLUE
ANTENNA ADAPTER
ANTENNA ADAPTER
When using an Alpine radio in
non-amplified vehicles
PIONEER RADIO:
ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
(CONNECT THE 3.5mm FROM AUDIO CABLE TO
AUX IN OF THE RADIO)