Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford ExplorEr with MyFord touch with Sony aMp 2011-2015
Automotive Data Solutions Inc. © 2021
3
Fig. 1.7
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.6
Fig. 1.1 Fig. 1.2
DASH DISASSEMBLY
NOTE:
In some cases the heated steering wheel module will
need to be relocated. (Fig. 1.6)
Requires shallow mount radio. Requires trimming.
1. Unclip and remove the two (2) trim panels at the left and
right of the OEM radio. (Fig. 1.1)
2. Remove four (4) 7mm screws holding the radio and climate
control panel. (Fig. 1.2)
3. Unclip and remove the radio and climate control panel.
Unplug the connectors. (Fig. 1.3)
4. Remove four (4) 7mm screws holding the OEM radio.
Unplug and remove the OEM radio. (Fig. 1.4)
5. Remove four (4) 7mm screws holding the screen. Unplug
and remove the OEM screen. (Fig. 1.5)
6. Relocate heated steering wheel module (if required). (Fig.
1.6)
7. Cut or bend metal bracket (if required). (Fig. 1.7)
Keep screws and brackets for MFT1 dash kit assembly.
Unbox MFT1 dash kit and locate bracket set #1, discard
set #2.
INSTALLATION INSTRUCTIONS
2