Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford ExpEdition with MyFord touch with Sony aMp 2015-2017
Automotive Data Solutions Inc. © 2021
3
Fig. 1.7
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.6
Fig. 1.1 Fig. 1.2
DASH DISASSEMBLY
NOTE: Climate control module needs to be relocated to
the bottom where the oem radio body was.
1. Unclip and remove the trim panel at the bottom of the
climate control panel. (Fig. 1.1) Remove two (2) 7mm
screws behind it. (Fig. 1.2)
2. Unclip and remove the radio and climate control panel,
starting from the bottom. Unplug the connectors. (Fig. 1.3)
3. Remove four (4) screws holding the radio. (Fig. 1.4) Remove
and unplug the radio. (Fig. 1.5)
4. Remove and unplug the screen. (Fig. 1.6)
5. Unplug the climate module, above the OEM screen
location. Remove 0ne (1) 7mm screw and remove the
module. (Fig. 1.7 ) The climate module will be relocated to
the bottom, where the oem radio body was.
tws and brackets for MFT1 dash kit assembly. Unbox
MFT1 dash kit and locate bracket set #2, discard set #1.
INSTALLATION INSTRUCTIONS
2