Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford tauruS with MyFord touch without aMp 2013-2019
Automotive Data Solutions Inc. © 2021
3
Fig. 1.7
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.6
Fig. 1.8
Fig. 1.1 Fig. 1.2
DASH DISASSEMBLY
NOTE: Requires shallow mount radio.
1. Unclip and remove the two (2) trim panels on the sides of
the center console. (Fig. 1.1-A)
2. Unclip and remove the dash trim panel (right of passenger
a/c vent). (Fig. 1.1-B)
3. Unclip and remove the knee bolster panel (below steering
column). (Fig. 1.1-C)
4. Remove one (1) 7mm screw from trim panel which has
interior light switch in it (left of steering column).
5. Unclip and remove the trim panel between the steering
column and the key cylinder. Remove one (1) 7mm screw
exposed. (Fig. 1.2)
6. Unclip and remove the gauge cluster trim panel. (Fig. 1.3-
A)
7. Unclip and remove the trim panel above the radio control
panel. (Fig. 1.3-B)
8. Remove four (4) 7mm screws securing the cup holder
panel. Unclip and remove the cup holder panel. (Fig. 1.4)
9. Remove four (4) 7mm screws holding the shifter panel.
Slide the panel backwards. (Fig. 1.5)
10. Remove four (4) 7mm screws securing the ashtray
assembly. Unclip and remove it. (Fig. 1.6)
11. Remove ten (10) 7mm screws holding the radio control
panel. Unclip and remove it. (Fig. 1.7)
12. Remove four (4) 7mm screws holding the radio screen.
Remove the screen. (Fig. 1.8)
13. Remove four (4) 7mm screws holding the OEM radio.
Remove the radio. (Fig. 1.8)
Unbox MFT1 dash kit and locate bracket set #1, discard
set #2.
INSTALLATION INSTRUCTIONS
1