Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford rangEr with MyFord touch without aMp 2019-2020
Automotive Data Solutions Inc. © 2021
3
Fig. 1.7
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.6
Fig. 1.8
Fig. 1.1 Fig. 1.2
DASH DISASSEMBLY
1. Unclip and remove the passenger side vent and dash panel
assembly. (Fig. 1.1)
2. Unclip and remove the vent to the left of the radio. (Fig. 1.2)
3. Unclip and remove the lower trim panels to the left and
right of the climate controls. (Fig. 1.3)
4. Unclip and remove the lower dash panel. (Fig. 1.4)
5. Remove two (2) 7mm screws securing the power port
panel. Unclip, unplug and remove the panel. (Fig. 1.5)
6. Remove six (6) 7mm screws holding the radio and climate
control panel. Unplug and remove the panel. (Fig. 1.6)
7. Remove four (4) 7mm screws holding the screen. Unplug
and remove the OEM screen. (Fig. 1.7)
8. Remove four (4) 7mm holding the radio. Unplug and
remove the OEM radio. (Fig. 1.8)
Keep screws and brackets for MFT1 dash kit assembly.
Unbox MFT1 dash kit and locate bracket set #2, discard
set #1.
INSTALLATION INSTRUCTIONS
6