Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford FlEx with MyFord touch without aMp 2013-2019
Automotive Data Solutions Inc. © 2021
3
Fig. 1.7
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.6
Fig. 1.8
Fig. 1.1 Fig. 1.2
DASH DISASSEMBLY
1. Unclip and remove the shifter bezel (Fig. 1.1)
2. Unclip and remove the trim above the radio and glove box.
(Fig. 1.2) Remove two (2) 7mm screws behind the trim. (Fig.
1.3)
3. Remove the panels on each side of the center console,
exposing (1) 7mm screw on each side. Remove the two (2)
screws. (Fig. 1.4)
4. Unclip, remove and unplug the radio bezel. (Fig. 1.5)
5. Remove four (4) screws holding the screen frame, remove
and unplug the OEM screen. (Fig. 1.6)
6. Remove four (4) screws holding the radio body, remove and
unplug the radio. (Fig. 1.7)
7. Trim the plastic behind the OEM screen. (Fig. 1.8)
Keep screws and brackets for MFT1 dash kit assembly.
Unbox MFT1 dash kit and locate bracket set #1, discard
set #2.
INSTALLATION INSTRUCTIONS
1