Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford F-150 with MyFord touch with Sony aMp 2013-2014
Automotive Data Solutions Inc. © 2021
3
INSTALLATION INSTRUCTIONS
VEHICLE DASH DISASSEMBLY
NOTE:
Top bracket needs to be bent up or removed, rear radio
hanger bracket needs to be cut off or bent back.
1. On passenger side of the vehicle, open the glove box and
push the side tabs toward each other to release glove box.
Extract (3) 8mm bolts to release the airbag. (1.1) (1.2)
2. Without disconnecting the airbag, push it out far enough to
expose the copper-plated 7mm screw on the left side of the
airbag and extract it. (1.3)
3. Remove the instrument cluster cover by removing (2) 7mm
screws. (1.4)
4. Remove both side vent covers (1.4).
5. Remove the radio bezel by extracting (2) 7mm screws from
the top and (2) 7mm screws from the bottom. (1.5) (1.6)
6. Remove (8) 7mm screws from the factory display and radio;
Remove both. (1.7)
7. Cut and remove the metal bracket at the top of the radio
cavity, behind OEM screen. (1.8)
Keep screws and brackets for MFT1 dash kit assembly.
Unbox MFT1 dash kit and locate bracket set #1, discard
set #2.
2
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.6
Fig. 1.7
Fig. 1.1
Fig. 1.2
Fig. 1.8