Owner's Manual

Table Of Contents
ADS-RR(SR)-MFT1-DS-IG-EN maestro.idatalink.com
Ford F SupEr duty with MyFord touch without aMp 2013-2016
Automotive Data Solutions Inc. © 2021
3
Fig. 1.3
Fig. 1.5
Fig. 1.4
Fig. 1.1 Fig. 1.2
DASH DISASSEMBLY
NOTE:
Temperature control module needs to be relocated to
where the factory radio body was, metal brace at the top
needs to be removed. (Fig. 1.5)
Requires shallow mount radio. Requires trimming.
1. Unclip the two (2) panels at the bottom of the factory bezel.
(Fig. 1.1) Remove two (2) 7mm screws behind the panels.
(Fig. 1.2)
2. Unclip and remove the radio and climate control panel.
Unplug the connectors. (Fig. 1.3)
3. Remove four (4) screws holding the screen frame, and two
(2) screws holding the radio body. (Fig. 1.4)
4. Remove and unplug the OEM screen. (Fig. 1.4)
5. Remove and unplug the OEM radio. (Fig. 1.4)
6. Remove the temperature control module. Relocate the
module where the OEM radio was. (Fig. 1.5)
7. Cut and remove the metal brace at the top of the radio
cavity. (Fig.1.5)
Keep screws and brackets for MFT1 dash kit assembly.
Unbox MFT1 dash kit and locate bracket set #1, discard
set #2.
INSTALLATION INSTRUCTIONS
1